D46.10-1162-08
Shown on model 907 with code C6L (Multifunction steering wheel) |
1 | Steering wheel | 2 | Electrical connector | 3 | Center bolt |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on carrying out repair work in the vehicle interior | ||
| Remove/install | ||
1 | Turn steering wheel (1) to center position. | ||
2 | Remove driver's airbag from steering wheel (1). | ||
3 | Release and disconnect electrical connector (2). | ||
4 | Remove center screw (3). | ||
Topical note | Notes on self-locking nuts and bolts | ||
For this, counterhold steering wheel (1). Aid of helper required. | |||
Installation: Install new center bolt (3). | |||
Screw/bolt, steering wheel to steering shaft | |||
5 | Mark serrations on steering wheel (1) relative to steering shaft. | ||
6 | Remove steering wheel (1). | Installation: Assign marking at serrations on steering wheel (1) to marking on steering shaft. | |
7 | Install in the reverse order. | ||
| Check | ||
8 | Perform function test of horns. | ||
9 | Perform function test on buttons on steering wheel (1). | Model 907, 910 | |
10 | Perform test drive to check the steering wheel position. | If steering wheel position is incorrect, | |
| |||
Perform suitable repair measures. |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah5400p000101a Oplysninger med henblik på at undgå skader på elektroniske komponenter på grund af elektrostatisk afladning
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen
- ar9160d0663ts