ar4230p0714gp

Remove/install rear axle speed sensor

Type ar · emne 42.30 · version 0102 · 2013-01-17

Gælder for: MODEL 461.305/333/340/343/392

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.30 Antiblokeringssystem (ABS) — Serie 461 (modeller 305, 333, 340, 343, 392)

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.12 Sensor/kontakt/ledningssæt — Serie 461 (modeller 305, 333, 340, 343, 392)

AR42.30-P-0714GP

Remove/install rear axle speed sensor

16.1.13

MODEL

461.305/333/340/343/392

Remove/install rear axle speed sensor

1

Supply line

L6/3

Left rear rpm sensor

L6/3x1

Rpm sensor connector

L6/4

right rear rpm sensor

L6/4x1

Rpm sensor connector

P42.30-2165-04

Remove/install

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

1

Switch off ignition

2

Raise vehicle with vehicle lift

AR00.60-P-1000G

3

Release and disconnect rpm sensor connector (L6/3x1, L6/4x1)

4

Expose feed line (1) of rpm sensor (L6/3, L6/4)

To do so, unclip feed line (1) from all cable brackets, open cable ties and remove retaining clamps.

Installation: Note installation of lines and route feed line (1) without any tension and chaffing.

5

Remove bolt and pull out rpm sensor (L6/3, L6/4)

6

Install in the reverse order

7

Read out and erase fault memory

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Henviste dokumenter