Remove/install rear brake control cable

AR42.20-D-0525TS

Remove/install rear brake control cable

19.04.2018

Model

907

except code B25 (Electric parking brake)

except code IT5 (5.0 tonner)

Model

910

except code B25 (Electric parking brake)

Shown on model 907, left side of vehicle

1

Brake cable

2

Steering knuckle

3

Electrical lines

4

Crossmember

5

Cable tie

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on repairs to brake system

AH42.00-P-0003-01A

 

Remove/install

1

Remove respective brake shoes of parking brake.

AR42.20-D-0530TS

2

Remove brake cable lock.

AR42.20-D-0530-03TS

Long-life grease

*BR00.45-Z-1001-06A

3

Remove brake cable (1) from steering knuckle (2).

4

Expose brake cable (1) at electric lines (3).

 Detach cable ties (5).

 The number of electric lines (3) and cable ties (5) can vary.

 Installation: Replace cable ties (5).

5

Remove brake cable (1) at brake compensator lever.

AR42.20-D-0520-06TS

6

Remove brake cable (1) from crossmember (4).

 To do so, unclip brake cable (1).

 Sleeve

*906589001400

7

Remove brake cable (1).

 Installation:
Route brake cable (1) free of tension and chafing.
Otherwise the brake cable (1) may be damaged.

 For this, route brake cable (1) out of holders (arrows).

8

Install in the reverse order

9

Adjust parking brake.

AR42.20-D-0540TS

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-06A

Long-life grease

A 000 989 63 51 11