Remove/install front brake control cable

AR42.20-D-0520TS

Remove/install front brake control cable

19.04.2018

Model

907, 910

except code B25 (Electric parking brake)

Shown on model 907

1

Brake cable

3

Crossmember

4

Passage grommet

2

Brake compensator lever

3a

Crossmember

Shown on model 910

1

Brake cable

3

Crossmember

4

Passage grommet

5

Fuel tank

6

Holder (model 910)

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Danger

Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.

No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only.
Wear protective clothing when handling fuel.

AS47.00-Z-0001-01A

Topical note

Notes on repairs to brake system

AH42.00-P-0003-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

 

Remove/install

1

Remove brake cable (1) from hand-operated parking brake lever.

AR42.20-D-0506TS

 Do not disconnect electrical connections.

2

Raise vehicle.

AR00.60-D-1000-04TS

Topical note

Special instructions for lifting and supporting vehicle

AH00.60-N-0100-01TS

3

Remove underbody paneling.

If installed.

AR61.30-D-1001TS

4

Lower fuel tank (5).

Model 910

AR47.10-D-4100TS

5

Remove feed-through grommet (4).

 Check feed-through grommet (4) for damage.

If corresponding findings are present,



Replace brake cable (1).

6

Unclip brake cable (1) from holder (6).

Model 910

7

Unhook brake cable (1) from brake compensator lever (2).

8

Release brake cable (1) from crossmember (3).

 Typ 907
Sleeve

*906589001400

9

Remove brake cable (1).

 To do so, guide brake cable (1) out of vehicle interior and out of crossmembers (3a).

 Installation: Lift floor covering in area of the guide-through of the brake cable (1).

10

Install in the reverse order

11

Adjust parking brake.

AR42.20-D-0540TS