W42.10-1316-07
1 | Hexagon adapter (on brake adjuster) | 4 | Washer | 8 | Brake caliper | ||
2 | Ring wrench | 5 | Spring cotter | 9 | Brake lining (outer) | ||
3 | Retaining bracket | 6 | Pin | 10 | Brake lining (inner) |
Different brake linings |
9 | Brake lining (outer) |
10 | Brake lining (inner) |
11 | Thrust piece attachments (on rear of brake lining) |
W42.10-1318-01
| Notes on evaluating brake pads | ||
| Remove | ||
1 | Remove wheel | ||
2 | Pressurize air brake system to cutout pressure | ||
3 | Release parking brake | Only on axles with combination brake cylinders. | |
4 | Remove retaining bracket (3) | ||
5 | Screw threaded pipes all the way into brake caliper by adjusting brake adjuster (8) | ||
6 | Remove brake linings (9, 10) from brake lining recesses | ||
| Clean | ||
7 | Check brake pads (9, 10), replace if necessary | Brake pad | |
If the brake linings (9, 10) are worn unevenly | |||
| |||
Check adjuster. | |||
| Check | ||
8 | Check brake pads (9, 10), replace if necessary | Brake pad | |
If the brake linings (9, 10) are worn unevenly | |||
| |||
Check adjuster. | |||
9 | Check thickness and condition of brake disks | ||
10 | Check boots on thrust pieces | ||
11 | Check brake caliper guide | ||
| Install | ||
12 | Insert brake linings (9, 10) | Do not mix up the brake linings (9, 10). The inner brake lining (10) can be identified by the thrust piece attachments (11). | |
13 | Adjusting play of disk brake | ||
14 | Install retaining bracket (3) | ||
15 | Mount wheel | ||
16 | Check service brake for proper operation and efficiency |
Henviste dokumenter
- ah4210n940606a Oplysninger om vurdering af bremsebelægninger
- ar4010w1100k
- ar4210w0120ac
- ar4210w0130ac
- ar4210w0140ac
- ar4210w017004ha
- ar4210w0180hb
- ar4210w019001h Efterjusteringsanordning justeres
- ar4210w0190hd