W42.10-0147-09
1 | Screw | 4 | Shield | 7 | Screws (M10x1.5x25) | ||
2 | Line bracket | 5 | Brake drum | 8 | Brake lining | ||
3 | Bolts | 6 | Adjusting screw |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Guidelines for cleaning brake linings | ||
| Remove | ||
1 | Remove wheel. | ||
2 | Release parking brake. | ||
3 | Remove line bracket (2). | Only on vehicles with code B02 (Anti-lock Brake System (ABS)). | |
4 | Remove shields (4). | ||
5 | Put back brakepads (8) at adjusting screws (6) until the brake drum (5) can be detached. | ||
6 | Press off brake drum (5) with three screws (7) evenly. | ||
7 | Clean brake drum (5) and brakepads (8). | ||
| Check | ||
8 | Check brake drum (5) and brakepads (8) for wear. | ||
9 | Check contact surfaces of wheel hub and brake drum (5) for cleanliness. | In the event of a problem, | |
| |||
clean contact surfaces. | |||
| Install | ||
10 | Push brake drum (5) onto wheel hub. | ||
11 | Adjust clearance of drum brake. | ||
12 | Install shields (4). | Shield to brake carrier | |
13 | Install line bracket (2). | Only on vehicles with code B02 (Anti-lock Brake System (ABS)). | |
Holder, signal line to brake carrier | |||
14 | Operate parking brake. | ||
15 | Attach wheel. | ||
16 | Carry out function and effectiveness check on service brake. |
Henviste dokumenter
- ah4210n000501a Retningslinjer for rengøring af bremsebelægninger
- ar4010w1100k
- ar4210w0183nb
- ar4210w1092nb
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet skarpkantede køretøjsdele