ar4210w0652nb

Remove/install rear axle wedge unit

Type ar · emne 42.10 · version 0100 · 2018-09-08

Gælder for: Model 967 with rear axle 770.004, 771.112/118/121

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 967

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 967

Gælder også for motorer/gearkasser: 770 004, 771 112, 771 118, 771 121

AR42.10-W-0652NB

Remove/install rear axle wedge unit

24.07.2018

Model

967 with rear axle 770.004, 771.112/118/121

Remove/install rear axle wedge unit

1

Return spring

2

Brake shoe

3

Wedge unit

4

O-ring

W42.10-1037-11

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Remove/install

1

Remove brake drum.

AR42.10-W-1012NB

2

Unhook both retracting springs (1) and swivel brake shoes (2) outward.

Installation: Hook retracting springs (1) with the right-angle bend towards the axle tube.

3

Remove combination brake cylinder.

AR42.10-W-0702NB

4

Remove wedge unit (3).

5

Remove O-ring (4) from brake carrier.

Installation: Replace O-ring(4).

6

Install in the reverse order.

Henviste dokumenter