Remove/install wedge unit

Type ar · emne 42.10 · version 0101 · 2006-09-19

Gælder for: MODEL 970, 972, 976 with drum brake (wedge unit)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 970 · Serie 972 · Serie 976

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.40 driftsbremse foran — Serie 970 · Serie 972 · Serie 976

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.42 driftsbremse bagest — Serie 970 · Serie 972 · Serie 976

AR42.10-W-0650B

Remove/install wedge unit

11.9.06

MODEL 970, 972, 976
with drum brake (wedge unit)

W42.10-1037-11

1 Return spring

2 Brake shoes

3 Wedge unit

4 O-ring

 	Remove/install
1	Remove brake drum	Front axle	AR42.10-W-1010C
		Rear axle	AR42.10-W-1010F
2	Unhook both return springs (1) and swing out brake shoes (2)	 Installation: Attach the retracting springs (1) with the cranked section pointing toward the inside.
3	Remove brake cylinder	Diaphragm brake cylinder	AR42.10-W-0800D
		Combination brake cylinder	AR42.10-W-0700C
4	Remove wedge unit (3)
5	Remove O-ring (4) from brake carrier	 Installation: Use new O-ring (4).
6	Install in the reverse order