Test values for distance and comparison measurements on rear axle
Number | Designation | Model 215 | Model 220 | ||
BE40.30-P-1001-05B | Dimension | H1 | mm | 4 | 4 |
H2 | mm | 3 | 3 | ||
H4 | mm | 4 | 4 | ||
H5 | mm | 6 | 6 | ||
H6 | mm | 1096 (2) | 1096 (2) | ||
H7 | mm | 1085 (2) | 1085 (2) | ||
H8 | mm | 3 | 3 | ||
H9 | mm | 3 | 3 | ||
See picture in | |||||
170 589 00 63 00
168 589 07 63 00
124 589 01 19 00
124 589 02 19 00
Mount
Telescopic measuring rod
Telescopic measuring rod
Set of measurement fixtures
124 589 08 63 00
Connecting pieces
The set of measurement fixtures 168 589 07 63 00 is designed so that the measuring bolts, corresponding to the measurement points on the vehicle, can be screwed together from mounting bolts, extensions and measuring tips.
The construction of the measuring bolts is shown in the table, where the numbers in the column headed "Measuring bolt construction" are the special tool end numbers
For example: 02/06/10 = 168 589 07 63 02 (support stud)
168 589 07 63 06 (extension)
168 589 07 63 10 (measuring probe)
Distance and comparison measurement | Setup of measuring tips | Telescopic measuring rod |
H1 | 02/06/10 | 124 589 02 19 00 |
H2 | 02/06/05/socket wrench bit | 124 589 02 19 00 |
H4 | 02/06/10 | 124 589 02 19 00 |
H5 | 02/06/05/socket wrench bit | 124 589 02 19 00 |
H6 | 02/06/05/socket wrench bit | 124 589 02 19 00 |
H7 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
H8 | 02/07/05/socket wrench bit | 124 589 01 19 00 |
H9 | 02/07/05/socket wrench bit | 124 589 02 19 00 |
P40.30-2056-11
The measuring points are shown on model 215
1 Comparison dimension "H1" measured from the check bore "K" to the tie rod support on the wheel carrier left to right.
P40.30-2057-11
2 Comparison dimension"H2" measured from the check bore "K" to the center of the torx bolt head of the front bearing of the rear axle carrier left to right. Unscrew, screw in torx bolts if necessary and check for bending.
P40.30-2058-11
3 Comparison dimension "H4" measured from the check bore "K" to the center of the hexagon bolt of the front thrust arm on the rear axle carrier left to right.
P40.30-2059-11
4 Comparison dimension "H5" measured from the check bore "K" to the center of the torx bolt head of the rear bearing of the rear axle carrier left to right. Unscrew, screw in torx bolts if necessary and check for bending.
P40.30-2060-11
5 Distance dimension "H6" measured to the center of the torx bolt heads between the front bearings of the rear axle carrier.
P40.30-2061-11
6 Distance "H7" measured to the centers of the torx bolt heads between the rear mountings of the rear axle carrier.
P40.30-2065-11
7 Distance dimension "H8" measured to the center of the torx bolt heads between the front and rear bearing of the rear axle carrier.
P40.30-2063-11
8 Comparison measurement "H9" measured diagonally from left to right to the centers of the torx bolt heads between the front and rear mountings of the rear axle carrier.