ar4020p032302ff

Adjust front axle toe

Type ar · emne 40.20 · version 0201 · 2006-07-26

Gælder for: MODEL 454.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 40 Hjul, undervognsudmåling › 40.20 Undervognsudmåling — Serie 454 (modeller 0**)

EinPAS 20 Undervogn › 20.10 Undervognsudmåling › 20.10.20 diagnose/kontrol/udmåling/indstilling — Serie 454 (modeller 0**)

AR40.20-P-0323-02FF

Adjust front axle toe

Modification notes

8.3.05

Front axle total toe-in

Model 454.0

*BE40.20-P-1001-07B

Front axle toe-in test values

Number

Designation

Model
454.0

BE40.20-P-1001-07B

Front axle total toe-in

°

+0° 0' (0° 12')

Track rod

Number

Designation

Model
454.0 except model 454.034

Model
454.034

BA46.40-P-1002-01I

Locknut on track rod

Nm

44

43

Commercially available tools

Number

Designation

WH58.30-Z-1068-06A

19 mm open end wrench with fixture for 14x18 torque wrench

Adjust front axle toe

1 Loosen clamps of bellows at tie rods (2).

2 Loosen nut (1) on both sides.

3 Rotate the tie rods (2) to adjust the toe-in.

Check that the bellows are not twisted after adjusting the toe-in.

4 Tighten nut (1) on both sides.

5 Fasten bellows to the tie rods (2) with clamps.

P40.20-2211-03