Model | 900.63 |
except code XL8 (Higher weight 3.880 kg) | |
Model | 906.11/131/133/135/21/23/61/63/71/73 |
except code A50 (Front axle with increased load capacity) | |
except code C15 (Vehicle lowering) | |
except code XL7 (Weight variant 4050 kg) | |
except code ZG1 (Engageable all-wheel drive) | |
except code ZG3 (Engageable all-wheel drive with gear reduction) | |
except code ZU7 (National version for Canada) | |
except code ZU8 (National version for USA) |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||
BE40.20-D-1001-13A | Permissible difference in front axle camber | between left and right sides of vehicle | ° | 0°20' |
For adjustment | ° | 0°10' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1009-13A | Camber with front-axle load of 1650 kg | or for transverse control arm angle | ° | 3,3 | ||
Permissible camber value | Min. | ° | 0°-35' | |||
max. | ° | 0°5' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-25' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-35' | |||
For significant wear on outside shoulder of tire | ° | 0°-35' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1010-13A | Camber with front-axle load of 1600 kg | or for transverse control arm angle | ° | 4 | ||
Permissible camber value | Min. | ° | 0°-28' | |||
max. | ° | 0°12' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-18' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-28' | |||
For significant wear on outside shoulder of tire | ° | 0°-28' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1011-13A | Camber with front-axle load of 1550 kg | or for transverse control arm angle | ° | 4,7 | ||
Permissible camber value | Min. | ° | 0°-21' | |||
max. | ° | 0°19' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-11' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-21' | |||
For significant wear on outside shoulder of tire | ° | 0°-21' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1012-13A | Camber with front-axle load of 1500 kg | or for transverse control arm angle | ° | 5,4 | ||
Permissible camber value | Min. | ° | 0°-13' | |||
max. | ° | 0°27' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°-3' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-13' | |||
For significant wear on outside shoulder of tire | ° | 0°-13' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1013-13A | Camber with front-axle load of 1450 kg | or for transverse control arm angle | ° | 6,1 | ||
Permissible camber value | Min. | ° | 0°-6' | |||
max. | ° | 0°34' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°4' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°-6' | |||
For significant wear on outside shoulder of tire | ° | 0°-6' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1014-13A | Camber with front-axle load of 1400 kg | or for transverse control arm angle | ° | 6,8 | ||
Permissible camber value | Min. | ° | 0°2' | |||
max. | ° | 0°42' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°12' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°2' | |||
For significant wear on outside shoulder of tire | ° | 0°2' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1015-13A | Camber with front-axle load of 1350 kg | or for transverse control arm angle | ° | 7,6 | ||
Permissible camber value | Min. | ° | 0°11' | |||
max. | ° | 0°51' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°21' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°11' | |||
For significant wear on outside shoulder of tire | ° | 0°11' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1016-13A | Camber with front-axle load of 1300 kg | or for transverse control arm angle | ° | 8,3 | ||
Permissible camber value | Min. | ° | 0°19' | |||
max. | ° | 0°59' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°29' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°19' | |||
For significant wear on outside shoulder of tire | ° | 0°19' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1017-13A | Camber with front-axle load of 1250 kg | or for transverse control arm angle | ° | 9 | ||
Permissible camber value | Min. | ° | 0°28' | |||
max. | ° | 1°8' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°38' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°28' | |||
For significant wear on outside shoulder of tire | ° | 0°28' |
Test and adjustment values for front axle camber |
Number | Designation | Model 900.63 except code XL8, model 906.11/131/133/135/21/23/61/63/71/ 73 except code A50/C15/XL7/ZG1/ ZG3/ZU7/ZU8 | ||||
BE40.20-D-1018-13A | Camber with front-axle load of 1200 kg | or for transverse control arm angle | ° | 9,7 | ||
Permissible camber value | Min. | ° | 0°37' | |||
max. | ° | 1°17' | ||||
Adjustment value for camber | Values not OK | Initial setting, correction | ° | 0°47' | ||
Values OK | For wear on outside shoulder of tire | ° | 0°37' | |||
For significant wear on outside shoulder of tire | ° | 0°37' |
1 | Note down the permissible camber value in the table based on the determined front-axle level. |
2 | Compare the permissible camber value against the actual value from the wheel alignment check. |
Observe permissible difference in front axle camber between right and left sides of the vehicle. |
3 | Determine level of wear on outside shoulder of tire. |
For an actual value within the permissible camber value and with wear on outside shoulder of the tire. |
If the difference between the inner and outer tire tread channel depth is greater than 2 mm, there is a high level of wear on the outside shoulder of the tire. |
4 | Take adjustment value from table and note down. |