Check and adjust axial play of connecting flange

Type ar · emne 35.31 · version 0107 · 2009-01-27

Gælder for: Rear axle center assembly dia. 168 in MODEL 124.104 up to 30.4.94, 124.105 /106, 124.107 up to 30.4.94, 170.435, 202.180 Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185, 124.186 up to 28.2.94, 201.018 /023 /024 /122 /126, 202.018 /078 /120 /121 /122 /125 /182, 210.003 /004 except CODE (450) Taxi version Rear axle center assembly dia. 168 in MODEL 124.020 /021 /080 /081 /120 /125 /126 /180 /185 /186, 201.018 /023 /024 /122 /126 up to 31.10.88 with CODE (4

Ikke tilgængelig på “da”; vises på Engelsk.

AR35.31-P-0540-02D

Test values for connecting flange/differential housing

Number	Designation		Model 124	Model 170	Model 201	Model 202	Model 210


BE35.31-P-1001-05A	Axial play between connecting flange and differential housing	mm	0.03 to 0.3	0.03 to 0.3	0.03 to 0.3	0.03 to 0.3	0.03 to 0.3

Check and adjust axial play of connecting flange

P35.31-0229-01

1 Ensure that the shim (31a) on the end face of the differential case makes good contact (arrow).

P35.31-0230-01

2 Check the axial play between the connecting flange and rear axle side gear, if necessary install a thicker or thinner retaining ring (30).



The axial play must be in the specified tolerance range.



The retaining rings are available in the thickness range of 1.2 mm to 1.8 mm, in stages of
0.05 mm.