Disassemble/assemble through-drive cover with input shaft

AR35.30-W-0395MA

Disassemble/assemble through-drive cover with input shaft

26.10.10

18.10.10

Reference added

Operation step 1, 8

AR35.30-W-0350MB



Disassemble

1

Remove through-drive cover (1)

Rear axle 748.261/271/703

AR35.30-W-0350MA

Rear axle 740.89, 748.263 /273/275

AR35.30-W-0350MB

2

Pull input shaft (4) out of through-drive housing (5)

3

Remove tapered roller bearing (3) from input shaft (4)

 Prop up with the lower section of the puller and pry off using the hydraulic press.



*000589453300

4

Remove bearing outer race (2) inwards out of the through-drive cover (1)



*343589071500



Assemble

5

Install bearing outer race (2) into through-drive cover (1)



*343589071500

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

6

Install tapered roller bearing (3)

 Heat tapered roller bearing (3) up to approx. 80 °C and slide all the way onto the input shaft (4).

7

Insert input shaft (4) into through-drive housing (5)

8

Install through-drive cover (1)

Rear axle 748.261/271/703

AR35.30-W-0350MA

Rear axle 740.89, 748.263 /273/275

AR35.30-W-0350MB