Remove/install cover for through-drive

AR35.30-W-0350MA

26.10.10

REAR AXLE 748.261 /271 /703
Through-drive axle for NAT 7 with ring gear Ø 233 mm

W35.30-1036-12

1 Screw

2 Threaded ring

3 Security bolt

4 Locking plate

5 Through-drive cover

6 Through-drive housing

7 Dowel pin

	Removing
1	Remove differential assembly.		AR35.30-W-0432I
2	Install differential assembly to assembly stand
3	Remove differential lock shift cylinder		AR35.40-W-0647C
4	Remove threaded ring (2)		AR35.30-W-0476A
5	Unscrew bolts (1) and remove cover for through-drive (5)
6	Remove dowel pins (7) downwards
7	Remove through-drive cover (5)
4	Disassemble through-drive cover (5)	 Only when the through-drive cover (5) is to be replaced.	AR35.30-W-0395MA
	Install
8	Clean sealing surfaces on through-drive cover (5) and through-drive housing (6) and coat with sealant		*BR00.45-Z-1015-01A
9	Install dowel pins (7)
10	Mount through-drive cover (5) over the dowel pins (7) and screw tight	 Rear axle 748.26/27	*BA35.30-N-1003-04A
		 Rear axle 748.703	*BA35.30-N-1003-04B
11	Install threaded ring (2)		AR35.30-W-0476A
12	Install differential lock shift cylinder		AR35.40-W-0647C
13	Remove differential assembly from support on assembly stand
14	Install differential assembly		AR35.30-W-0432I

 Through-drive

Number	Designation		Rear axle 748.26/27 with through-drive, ring gear 233 mm dia.


BA35.30-N-1003-04A	Bolt, through-drive cover to through-drive pinion housing	Nm	120

 Through-drive

Number	Designation		Rear axle 748.703 with through-drive, 233 mm dia. ring gear


BA35.30-N-1003-04B	Bolt, through-drive cover to through-drive pinion housing	Nm	120

Repair materials

Number	Designation	Order number
BR00.45-Z-1015-01A	Loctite 5203 sealant	A 002 989 71 20 10