1 | Through-drive cover |
2 | Bearing outer race |
3 | Tapered roller bearing |
4 | Drive shaft |
5 | Through-drive housing |
W35.30-1037-03
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
| Disassemble | ||
1 | Remove through-drive cover (1) |
| |
Rear axle 748.283/293/295 | |||
2 | Pull input shaft (4) out of through-drive housing (5) | ||
3 | Remove tapered roller bearing (3) from input shaft (4) | Use lower part of to support puller and pry off hydraulic press. | |
Puller | |||
4 | Remove bearing outer race (2) inwards out of the through-drive cover (1) | ||
| Assemble | ||
5 | Heat up cover of through-drive (1) in the area of the bearing outer race (2) to approx. 80 °C and install bearing outer race (2) into through-drive housing (1)) | ||
6 | Heat up bearing outer race (3) to approx. 80 °C and assembly until it abuts on the drive shaft (4) | If necessary, drive in tapered roller bearing (3) using drift. | |
7 | Insert input shaft (4) into through-drive housing (5) | ||
8 | Install through-drive cover (1) |
| |
Rear axle 748.283/293/295 |
000 589 45 33 00
Puller
Henviste dokumenter
- ar3530w0350h
- ar3530w0350ha
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande