ar3520d0320a

Disassemble/assemble rear wheel hub

Type ar · emne 35.20 · version 0103 · 2011-10-31

Gælder for: REAR AXLE 742.501 in MODEL 668, 670

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.20 Hjulleje, nav — Serie 668 · Serie 670

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.41 hjulholder/akselspindel/hjulnav/hjulleje — Serie 668 · Serie 670

EinPAS 17 Drivstreng/aksel › 17.52 Ekstra aksel › 17.52.42 hjulholder/akselspindel/hjulnav/hjulleje — Serie 668 · Serie 670

Gælder også for motorer/gearkasser: 742 501

AR35.20-D-0320A

Disassemble/assemble rear wheel hub

25.10.11

REAR AXLE 742.501 in MODEL 668, 670

Disassemble/assemble rear wheel hub

D35.20-0064-06

1 Outer race of outer bearing

2 Rear wheel hub

3 Inner race of outer bearing

4 Inner tapered roller bearing

5 Thrust ring

Disassemble/assemble

1

Remove rear wheel hub

AR35.20-D-0310C

2

Remove inner tapered roller bearing (4) from rear wheel hub (2)

3

Drive out the inner outer race (3)

Drive out using a suitable drift.

4

Drive out outer race (1)

Drive out using a suitable drift.

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

5

Check thrust ring (5) for running in scores, remove if necessary

Spot drill the thrust ring (5), split using a chisel and then remove.

Installation: Heat up the thrust ring (5) to approx. 80 °C and push on as far as the end stop.

6

Assemble in the reverse order

Henviste dokumenter