B32.20-0134-09
1 | Triangular bar | 4 | Bolt | |
2 | Spacer | A | Label | |
3 | Bolt |
Danger | Risk of death caused by vehicle slipping or toppling off during lifting | Only lift vehicle at the lift support points specified by the vehicle manufacturer. | |
Topical note | Special instructions for lifting and supporting vehicle | ||
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Park the vehicle in a flat surface, stop the engine, and apply the parking brake | Chock the wheels to prevent the unexpected moving of the vehicle. | |
2 | Lift the rear axle and support the chassis with proper stands | ||
3 | Place a lifting device under the rear axle | ||
4 | Remove the screws (4) and the spacers (2) of the triangular bar (1) on the chassis | .Triangular bar screws on the chassis | |
5 | Remove the screws (3) of the triangular bar (1) on the top of the differential | .Triangular bar screws on the axle | |
6 | Remove the triangular bar (1) from the vehicle | ||
| Check | ||
7 | Check the triangular bar (1) for damages and wear | In case of out-of-round, deformations to the attachments or corrosion: | |
| |||
Replace the triangular bar. | |||
8 | Check the triangular bar bushings (1) for damages and wear |
| |
In case of deformations found in the housings or signs of excessive wear: | |||
| |||
Replace the triangular bar bushings (1). | |||
9 | Install in reverse order |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ah0060n010001b Bemærkning til hævning og opklodsning
- ar3515b000101b
- as0000z003201a Livsfare hvis køretøjet glider ned fra eller tipper på liften under løft