ar3330w7132a
Remove/install radial shaft sealing ring on output flange of front axle gear
Type ar · emne 33.30 · version 0100 · 2007-07-23
Gælder for: FRONT AXLE 730.116
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel
EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel
Gælder også for motorer/gearkasser: 730 116
AR33.30-W-7132A
| Remove/install radial shaft sealing ring on output flange of front axle gear
| 11.7.07
|
FRONT AXLE 730.116
1 Collar nut
2 Output flange
3 Dust protective ring
4 Radial shaft seal
5 Output shaft
Figure item, etc.
| Work instructions
|
|
|
| Notes on evaluating leakages
|
| AH00.00-N-0011-01A
|
| Remove/install output flange on rear axle
| If there is galling or scoring, a new output flange (2) with a new dust protective ring (3) must be installed.
| AR33.30-W-0474A
|
4
| Radial shaft seal
| Install a new radial shaft sealing ring (4).
|
|
Henviste dokumenter
