ar3330w0491b

Remove/install through-drive shaft

Type ar · emne 33.30 · version 0100 · 2007-07-23

Gælder for: FRONT AXLE 730.116

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel

Gælder også for motorer/gearkasser: 730 116

AR33.30-W-0491B

Remove/install through-drive shaft

11.7.07

FRONT AXLE 730.116

Remove/install through-drive shaft

W33.30-1061-06

1 Circlip

2 Support disk

3 Grooved ball bearing

4 Through-drive shaft

Removing

1

Remove output flange from through-drive

AR33.30-W-0474A

2

Remove circlip (1)

3

Remove support disk (2)

4

Remove through-drive shaft (4) from axle housing

5

Pull grooved ball bearing (3) off through-drive shaft (4)

*001589193300

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

6

Heat up grooved ball bearing (3) to approx. 80 °C and push all the way onto through-drive shaft (4)

7

Install through-drive shaft (4) in axle housing

8

Insert support disk (2)

9

Install circlip (1).

10

Install output flange at through-drive

AR33.30-W-0474A

Remove/install through-drive shaft

001 589 19 33 00

Puller

Henviste dokumenter