Remove and install drive shaft of through-drive with differential

AR33.30-W-0390A

12.4.10

FRONT AXLE 730.102/ 110

Remove and install drive shaft of through-drive with differential

W33.30-0045-06

1 Collar nut

2 Connector flange

3 Screw

4 Locking plate

5 Threaded ring

6 Radial sealing ring

7 Radial sealing ring

8 Grooved ball bearing

9 Through-drive cover

10 Drive shaft and differential

11 Grooved ball bearing

12  Bracket

13  Wrench socket

	Removing
1	Remove through-drive cover and drive shaft		AR33.30-W-0382A
2	Detach coupling flange (2)		*001589750900
			*035589013300
			*717589003100
3	Remove locking plate (4)
4	Unscrew threaded ring (5).		*395589020700
5	Drive radial sealing rings (6 and 7) out of the threaded ring
6	Drive the drive shaft and differential (10) out of through-drive cover (9)
7	Remove grooved ball bearing (8) out of the cover of through-drive (9)	 Use a suitable drift.
	Install
8	Install grooved ball bearing (8) up to the stop in the through-drive cover (9)		*389589031500
9	Use drift (14) to install radial sealing rings (6 and 7) in the threaded ring (5)	 Coat radial sealing rings without outer surface lined with rubber with sealant. First install radial sealing ring (7, without dust lip) with lip to the threaded side, then radial sealing ring (6, with dust lip). Fill space between dust and sealing lip of radial sealing ring (6) with grease.	*BR00.45-Z-1015-01A
			*BR00.45-Z-1017-06A
			*312589151500
10	Drive in drive shaft with differential (10) as far as the end stop into the cover of through-drive
11	Install threaded ring (5)	 Coat threads of threaded ring (5) with sealing compound.	*BR00.45-Z-1015-01A
			*BA33.30-N-1008-06A
			*395589020700
			*000589696300
12	Install locking plate (4)		*BA33.30-N-1007-06A
13	Install coupling flange(2)	  Use new collar nut.	*BA33.30-N-1006-06A
			*001589750900
			*717589003100
			*000589696300
14	Secure collared nut		AR33.30-W-0085-03A
15	Install through-drive cover complete with drive shaft		AR33.30-W-0382A

 Differential assembly with through-drive

Number	Designation				Front axles 730.102/110


BA33.30-N-1006-06A	Collar nut, coupling flange to drive shaft			Nm	900
BA33.30-N-1007-06A	Bolt, locking plate to through-drive pinion housing			Nm	25
BA33.30-N-1008-06A	Ring nut in through-drive cover	Stage 1	With claw-type wrench	Nm	-
			Direct threaded ring	Nm	-
		Stage 2	Release distance	°	-