Shown on model 415.703 |
1 | Cross member |
2 | Screw |
3 | Transverse control arm |
4 | Screw |
S33.20-4509-06
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Remove crossmember (1) |
| |
2 | Remove each front wheel | ||
3 | Remove bottom engine compartment paneling | ||
4 | Remove screw/bolt (2) on steering knuckle | Bolt with nut, steering knuckle to transverse control arm | |
5 | Remove transverse control arm (3) from steering knuckle | ||
6 | Remove bolts (4) | Bolt, transverse control arm to front axle carrier | |
7 | Remove transverse control arm (3) | ||
| Check | ||
8 | Check transverse control arm (3) for wear and damage | If damage and/or wear is found, replace the transverse control arm (3). | |
9 | Install in the reverse order |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar3130s4115c
- ar4010s1100c
- ar6120s1105c
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.