ar3320p0425d

Checking supporting joint and follower joint of steering knuckle mount (removed)

Type ar · emne 33.20 · version 0102 · 1999-09-22

Gælder for: MODEL 210.08 /28

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.20 Hjulleje, nav — Serie 210 (modeller 08*, 28*)

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.42 akselspindel/hjulnav/hjulleje — Serie 210 (modeller 08*, 28*)

AR33.20-P-0425D

Checking supporting joint and follower joint of steering knuckle mount (removed)

2.9.96

MODEL 210.08 /28

Checking supporting joint and follower joint of steering knuckle mount (removed)
Checking supporting joint and follower joint of steering knuckle mount (removed)

P33.20-0349-01

P33.20-0350-01

Removal

1

Remove supporting joint (7)

AR33.20-P-0440D

2

Remove upper wishbone (6)

AR33.20-P-0500D

Checking

3

Move ball pin in all directions with an approx. 150 mm tube to check ball pin of supporting joint (7) and follower joint (8).

It must be possible to move the ball pin without any play, without jamming and creaking noises, replace supporting joint or upper wishbone if necessary after checking.

4

Check rubber boot (7f, 8f) for cracks and damage

Replace supporting joint or upper wishbone if necessary after checking.

Installation

5

Install supporting joint (7)

AR33.20-P-0440D

6

Install upper wishbone (6)

AR33.20-P-0500D

Henviste dokumenter