Remove/install level sensor

AR32.33-D-0009H

Remove/install level sensor

17.12.15

Model

906.11/13/15/21/23/25/61/63/65/71/73

with code PL9 (Air suspension, company VB-Airsuspension)

Shown on model 906.13

1

Ball head rod

4

Screw

B22/6

Right rear level sensor

2

Fuse

5

Electrical connector

3

Lever

B22/5

Left rear level sensor

Shown on model 906.13

1

Ball head rod

3

Lever

B22/5

Left rear level sensor

B22/6

Right rear level sensor

Shown on model 906.15

1

Ball head rod

3

Lever

B22/5

Left rear level sensor

B22/6

Right rear level sensor



Notes on air suspension

AH32.22-N-1000-01H

 

Remove/install

1

Deactivate air suspension

AR32.22-D-6000-02H

2

Raise vehicle

AR00.60-D-1000H

3

Pull out retainer (2) in direction of arrow

4

Pry ball head rod (1) off ball head of lever (3)

 Installation: Position the ball head rod (1) and lever (3) as shown.
The ball head rod (1) must engage audibly in the ball head of the lever (3).

5

Disconnect electrical connector (5) from left rear level sensor (B22/5) or from right rear level sensor (B22/6)

6

Unscrew screws/bolts (4) and remove left rear level sensor (B22/5) or right rear level sensor (B22/6) from bracket

 Installation: Position the left rear level sensor (B22/5) or right rear level sensor (B22/6) as shown.

7

Install in the reverse order

Calibrate

8

Calibrate driving level

AR32.22-D-9000H