Removing and installing front spring · ar3220p0200fb · Mercedes-Benz WIS

AR32.20-P-0200FB

Removing and installing front spring

13.10.97

MODEL 210.07
with CODE (979) Special protection version
with CODE (Z04) Light armoring
with CODE (Z06) B6 armoring

P32.20-0292-06

12 Front spring

13 Rubber mount

31 Wishbone



01a Spring compressor

01b Tensioning plate

01c Tensioning plate

 	Removal, installation
	General on springs.	Models 129, 140, 168, 170, 202, 210	AH32.20-P-9404-01A
1	Install tensioning plates (01b, 01c).		*202589136300
2	Install spring compressor (01a).		*202589013100
		 Alternatively	*202589023100
Danger!	Injury hazard! Springs or spring elements under pressure can pinch and crush body parts during work.	Use only approved spring compressors and also shield hazard area if applicable. Check special tools for damage and proper function (visual check). Wear protective gloves	AS00.00-Z-0001-01A
3	Compress front spring		AR32.20-P-0200-01A
4	Remove front spring (12) toward front together with rubber mount (13).	 Clean wishbone (31) in area of contact surface.
		After replacing the front spring or rubber mount .
		Check headlamp adjustment, correct.	AP82.10-P-8260A
5	Reinstall in opposite order

202 589 13 63 00

202 589 01 31 00

202 589 02 31 00

Tensioning plates

Spring compressor

ah3220p940401a Generelt om fjedre
ap8210p8260a Kontrol, korrektion af forlygteindstilling
ar3220p020001a
as0000z000101a Fare for kvæstelse på grund af fastklemning og knusning ved arbejde på fjedre eller fjederlegemer, som er under forspænding