AR30.22-L-1152VB | Remove/install idle speed control (ISC) actuator | 2.8.01 |
ENGINE 166.940 /960 /990 in MODEL 168 as of 1.3.01
ENGINE 166.995 in MODEL 168
ENGINE 166.961 /991 in MODEL 414.700
L07.53-0014-06
1 Air intake scoop
2 Air intake hose
3 Sectional rubber seal
4 Sealing ring
5 Screw
6 Damper
7 Crankcase breather line
8 Screw
9 Idle speed control actuator
N3/18 ECM (engine control monolith) control module
| Remove/install | ||
1 | Remove air intake scoop (1) and air intake duct (2) | ||
2 | Remove crankcase breather line (7) from damper (6) | ||
3 | Remove damper (6) from air cleaner | Installation: replace sealing ring (4). | |
4 | Separate connectors from Engine Control Monolith control unit (N3/18) | ||
5 | Remove idle speed control (9) actuator from intake manifold | Idle speed control (9) actuator is integral with the Engine Control Monolith (N3/18) control unit. Installation: replace sectional rubber seal (3) | |
6 | Install in the reverse order | ||
7 | Read out fault memory | ||
| Connect STAR DIAGNOSIS, read fault memory | ||
Diagnosis system STAR DIAGNOSIS |
Idle speed control (ISC)
Number | Designation | Engine 166.940/ | Engine 166.961/ | |
BA30.22-P-1001-01A | Idle speed control actuator bolt to intake manifold | Nm | 7 | 7 |
Commercially available tools