D30.10-0016-01
1 Alter position of connecting rod (arrow) between relay lever of pedal value sensor and angled lever by turning the hexagon bolt so that the tips of the angled lever and of the drag lever (arrow) are positioned one above the other when the control pressure bowden cable (1) is attached.
D30.10-0012-01
2 Detach control pressure bowden cable (1) and move accelerator into CTP position.
D30.10-0013-01
3 Position the tips of the angled lever (2) and of the drag lever (3) above each other (arrow).
D30.10-0014-01
4 Push control pressure bowden cable (1) back and then pull it forward again until a resistance is felt (relay lever in transmission is resting against control pressure slide).
Adjust connecting rod (arrow) so that the control pressure bowden cable can be pressed onto the ball head free of tension.