ar3010d101011a

Adjusting throttle control for wide open throttle

Type ar · emne 30.10 · version 0103 · 2000-02-02

Gælder for: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 with TRANSMISSION 722.376 with CODE (G40) Automatic transmission W4A028

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 30 Regulering, hastighedsreguleringssystemer › 30.10 Mekanisk regulering — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

EinPAS 15 Motor › 15.45 Motorstyring › 15.45.35 Motorregulering — Serie 901 (modeller 0**) · Serie 902 (modeller 0**) · Serie 903 (modeller 0**) · Serie 904 (modeller 0**)

Gælder også for motorer/gearkasser: 111 979, 722 376

AR30.10-D-1010-11A

Adjusting throttle control for wide open throttle

Adjusting throttle control for wide open throttle

D30.10-0006-01

1 Place a 3 mm thick washer (arrow) between the accelerator pedal (1) and kickdown switch (2) and press accelerator pedal to "WOT position".

The kickdown switch (2) must not be operated when this is done.

Adjusting throttle control for wide open throttle

D30.10-0007-01

2 Release clip in mount at accelerator pedal (1) and pull into WOT position (arrow). Lock the moving detent tongues in this position.

Do not overtension throttle control.

Adjusting throttle control for wide open throttle

D30.10-0008-01

3 Release pressure again on the accelerator pedal (1) and move idle speed nut (3) at bowden cable against the stop.

Adjusting throttle control for wide open throttle

D30.10-0009-01

4 Remove washer. Once again depress accelerator pedal (1) fully and check WOT position. Play between accelerator pedal and kickdown switch (2) 3 1 mm.
Repeat setting if necessary.