P29.10-2087-09
Shown on vehicle with transmission 711.640 |
1 | Clutch pedal (for transmission 711, 716) | 4 | Fuse | 7 | Clutch master cylinder (for transmission 711, 716) | ||
2 | Brake pedal | 5 | Pin | 8 | Screw | ||
3 | Electrical connector | 6 | Pedal assembly | 9 | Nuts |
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Remove clutch master cylinder (7) | Transmissions 711, 716 | |
2 | Remove brake light switch (S9/1) | ||
3 | Disconnect electrical connector (3) | Transmissions 711, 716 | |
4 | Remove retainer (4) | ||
5 | Unscrew bolt (8) | ||
6 | Pull back floor covering in area of nuts (9) | ||
7 | Remove nuts(9) | Nut, brake unit to pedal module | |
8 | Remove high-voltage activation lock holder | Only on model 169.090 | |
9 | Pull pedal assembly (6) approx. 1 cm toward rear and pull pin (5) out of brake pedal (2) | ||
10 | Remove pedal assembly (6) toward rear | ||
11 | Install in the reverse order |
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ar2520p0100ak
- ar4210p0040ak
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)