ar4210p0040ak

Remove/install mechanical stop lamp switch

Type ar · emne 42.10 · version 0101 · 2005-04-13

Gælder for: MODEL 169.0 /3, 245.2

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.10 Driftsbremse — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

EinPAS 30 Belysningsanlæg › 30.15 Udvendig belysning › 30.15.12 Sensor/kontakt/ledningssæt — Serie 169 (modeller 0**, 3**) · Serie 245 (modeller 2**)

AR42.10-P-0040AK

Remove/install mechanical stop lamp switch

20.4.04

MODEL 169.0 /3, 245.2

Remove/install mechanical stop lamp switch

P42.10-2417-04

1 Actuating pin

2 Electrical connector

S9/1 Stop lamp switch (4-pin)

Remove/Install

1

Remove cover below left of instrument panel

AR68.10-P-1500AK

2

Detach electrical connector (2) of stop lamp switch (S9/1)

3

Remove stop lamp switch (S9/1)

Press in catch (arrow) and twist stop lamp switch (S9/1) to the right.

Installation: Pull actuating pin (1) all the way out. Fully depress brake pedal, insert stop lamp switch (S9/1) and twist to the left until the catch engages (arrow). The actuating path is adjusted automatically.

4

Install in the reverse order

Henviste dokumenter