Remove/install transfer case · ar2810s0100s · Mercedes-Benz WIS

AR28.10-S-0100S

Remove/install transfer case

4.11.11

MODEL 639 with ENGINE 646, 651 with CODE (ZG2) Permanent all-wheel drive

S28.10-4500-09

Shown with transmission 716.6

1 Propeller shaft

3 Propeller shaft

4 Transfer case

6 Engine support

8 Shift rod

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Detach propeller shaft (1) from transfer case (4)	 Tie propeller shaft (1) to underfloor.	AR41.10-S-0070S
2	Detach propeller shaft (3) from transfer case (4)	 Tie propeller shaft (3) to underfloor.	AR41.10-S-0050S
3	Remove engine supports (6)	Engine 646	AR22.10-S-4410S
		Engine 651	AR22.10-S-1170S
4	Unclip shift rod (8)	Only with transmission 716.6
5	Remove bolts of transfer case (4) on transmission	 Lower the transmission slightly in order to be able to reach all the bolts.
			*BA28.10-N-1002-01G
6	Remove transfer case (4) from vehicle.	 Use aid of helper.
		 Installation: Apply light coating of grease to gearing on transfer case (4).
		Long-life grease	*BR00.45-Z-1001-06A
7	Transfer banjo bolt of vent line	 Only with engine 646 and only when replacing transfer case (4). Install new seals.
			*BA28.10-N-1001-01G
8	Install in the reverse order
	Checking
9	Check oil level in transfer case (4) and correct if necessary
	Transfer case - oil change		AP28.00-S-2801A

 Transfer case complete

Number	Designation			Model 639 with code ZG2 without code XZ1	Model 639 with code ZG2 and code XZ1


BA28.10-N-1001-01G	Banjo bolt, vent lines to transfer case	M10	Nm	15	-
BA28.10-N-1002-01G	Bolt, transfer case to intermediate flange/transmission	M8	Nm	25	19

Repair materials

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51 11