ar2740s070002e

Remove/install heat shield on transmission

Type ar · emne 27.40 · version 0101 · 2020-07-20

Gælder for: Transmission 725.0 in model 447, 448

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.40 Hus — Serie 447 · Serie 448

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.40 Dæmpning/afskærmning/isoleringsmåtte — Serie 447 · Serie 448

Gælder også for motorer/gearkasser: 725 0**

AR27.40-S-0700-02E

Remove/install heat shield on transmission

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Transmission

725.0 in model 447, 448

Automatic transmission complete

Number

Designation

Transmission 725.0 in model 447

BA27.10-N-1008-06EA

Bolt, leaf spring for heat shield to transmission housing

Nm

5

Automatic transmission complete

Number

Designation

Transmission 725.0 in model 447

BA27.10-N-1009-06EA

Bolt, heat shield to oil pan

Nm

9

Remove/install heat shield on transmission

S27.40-A000-76

Remove

1

Unclip electrical wiring harness (2) from heat shield (1) (arrow).

2

Remove screw (3) and remove heat shield (1) downward.

3

Remove screw (4) and remove leaf spring (5).

If the automatic transmission is replaced.

Install

4

Attach leaf spring (5) to automatic transmission.

If the automatic transmission has been replaced.

5

Screw in and tighten screw (4)  .

If the automatic transmission has been replaced.

6

Slide heat shield (1) under leaf spring (5).

7

Screw in and tighten screw (3)  .

8

Attach electrical wiring harness (2) to heat shield (1) (arrow).

Henviste dokumenter