Remove, install induction-type pulse generator (output rpm) · ar2719s0800b · Mercedes-Benz WIS

AR27.19-S-0800B

Remove, install induction-type pulse generator (output rpm)

8.11.96

ENGINES 111, 601.970, 611.980 in MODEL 638 with CODE (G40) Automatic transmission
Transmission removed

S27.19-2009-12

1 Torx bolt

2 Retaining clamp

3 Spacer

B91 Induction-type pulse generator

B91.1 Induction-type pulse generator connector

 	Removing, installing
	Ensure absolute cleanliness, use only lint-free cloths.	 Contamination within the transmission represents a potential source of damage.
1	Remove electrohydraulic control unit	Connector (B91.1) can only be disconnected after removing the induction-type pulse generator (B91).	AR27.19-S-0210A
2	Detach cable of connector (B91.1) from retaining clamp (2)
3	Unscrew torx bolt (1)	 Ensure that the torx bolt (1) and spacer (3) do not fall into the transmission.
		 Spacer (3) is only installed with engines OM611, OM 601 D23 LA and M111 E23.
			*BA27.19-N-1001-02A
4	Remove induction-type pulse generator (B91) and disconnect connector (B91.1)	 Lift clip (arrow) with screwdriver until the connector (B91.1) can be disconnected.  Installation: Clip (arrow) must engage securely in induction-type pulse generator (B91).
5	Install in the reverse order

 Transmission electrical system

Number	Designation		Model 638 with Series 111, 601.970, 611.980 engine	Model 638 with engine 104.900


BA27.19-N-1001-02A	Induction-type pulse generator (output speed) to transmission	NM	10	10