Remove/install electrohydraulic controller unit (transmission installed)

AR27.19-S-0200S

Remove/install electrohydraulic controller unit (transmission installed)

25.10.10

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove oil pan (1) from automatic transmission

AR27.10-S-7030S

2

Remove oil filter (2) downwards

 Installation: Replace oil filter (2).

3

Remove guide bush (3)

AR27.19-S-4980S

4

Remove bolts (4) of electrohydraulic controller unit (5) on transmission housing



*BA27.35-N-1001-01A

5

Remove electrohydraulic controller unit (5)

 Pay attention to the utmost cleanliness during all work on the electrohydraulic controller unit (5). Only use lint free rag in order to avoid a malfunction of or damage to the automatic transmission.

 Installation: Insert selector valve.



Insert selector valve with driver into detent plate

AR27.19-S-0200-01SV

6

Install in the reverse order

Number

Designation

Transmission
722.685
in model 636

BA27.35-N-1001-01A

Electrohydraulic controller unit to transmission housing

Nm

8

Number

Designation

Transmission
722.680/682
in model 639

Transmission
722.683/685/686
in model 639

BA27.35-N-1001-01A

Electrohydraulic controller unit to transmission housing

Nm

8

8