AR27.10-S-7010SD | Remove/install oil filler pipe for automatic transmission | 5.8.10 |
TRANSMISSION 722.6 in MODEL 639 with ENGINE 646
S27.10-4508-06
Shown on vehicle as of vehicle identification number (VIN) 139839
1 Screw
2 Screw
3 Oil filler pipe
S27.10-4507-11
3 Oil filler pipe
4 Transmission housing
5 Screw
6 Screw
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Remove air filter housing | ||
2 | Remove bolt (1) | ||
3 | Remove bolt (2) | Perform only as of VIN 139839 with engine 646.982 . | |
| Oil filler pipe modified | ||
4 | Detach rear lower engine compartment paneling | Only carry out for model 639.7/8 as of VIN 055347. | |
5 | Remove bolt (5) | ||
6 | Remove screw (6) | | |
7 | Remove oil filler pipe (3) | To do so, push the oil filler pipe (3) upward out of the transmission housing (4) and remove by moving downwards. Seal the opening on the transmission housing (4). | |
Installation: The oil filler pipe (3) must be mounted free of tension. Clean the oil filler pipe (3) and transmission housing (4); replace the sealing ring. If the sealing ring or the oil filler pipe (3) is replaced due to leaks: | |||
Check oil level in automatic transmission; fill with oil if necessary | |||
Set of stop plugs | |||
Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | |||
8 | Install in the reverse order | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
9 | Check for leaks with engine running | Carry out a visual inspection only. |
Automatic transmission complete
Number | Designation | Model | ||
BA27.10-N-1001-04A | Automatic transmission to engine | M10 | Nm | 38 |
Set of stop plugs
129 589 00 91 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1051-04A | Cold degreasing agent/cold cleaning solvent HAKU 1025-920 | Chemische Werke Kluthe GmbH |
Henviste dokumenter
- ar0910s1150s
- ar2700s0101s
- ar6120s110503s
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
- bt2710s000701s