S26.60-4527-09
1 | Shift lever boot | 4 | Shift cable | 7 | Gearshift lever | ||
2 | Lock | 5 | Feeler gauge | ||||
3 | Lock | 6 | Reverse gear lock |
| Remove | ||
1 | Remove battery box | ||
2 | Unclip boot for gearshift lever (1) | Do not fully remove boot for gearshift lever (1). | |
3 | Set gearshift lever (7) to neutral | ||
Adjust | |||
4 | Release retainer (2) and lift up lock (3) | ||
5 | Insert feeler gauge (5) for adjusting shift cables (4) between reverse gear lock (6) and gearshift lever (7) | Use feeler gauge (5) with dimension between 8 and 9.5 mm. | |
Feeler gauge | |||
6 | Press in lock (3) | Lock (2) latches automatically into place. | |
7 | Remove feeler gauge (5) | ||
| Check | ||
8 | Check that shift mechanism is functioning correctly; repeat adjustment if necessary | ||
| Install | ||
9 | Clip in boot for gearshift lever (1) | Check for correct seating. | |
10 | Install battery compartment |
129 589 03 21 00
Feeler gauge