Gælder for: Transmission 712.612 in model 688, 979 Transmission 712.612/623/632 in model 368, 382, 384, 685, 688 Transmission 712.622/631 in model 368.0/1 Transmission 712.623/632 in model 693, 694, 695 Transmission 712.631 in model 384.334
Gælder også for motorer/gearkasser: 712 612, 712 622, 712 623, 712 631, 712 632
AR26.50-B-4743-01A
Remove/install circlip
Transmission
712.612 in model 688, 979
Transmission
712.612/623/632 in model 368, 382, 384, 685, 688
Transmission
712.622/631 in model 368.0/1
Transmission
712.623/632 in model 693, 694, 695
Transmission
712.631 in model 384.334
715 589 00 63 00
Assembly tool
1
Put the assembly device (1) in the snap ring bores (3).
Possibly one of the snap ring bores (3) might be exactly above one of the transmission front part oil holes. In this case, care must be taken to ensure that the coupling parts on the assembly device (1) do not engage the oil drilling.
2
Turn the hexagonal part (2) of the assembly device (1) until the snap ring is compressed up to a point in which it is possible to remove-it from its fitting place at the transmission front part.
3
Relieve the assembling device (1) and remove the locking ring (3).
4
The assembly is carried out in the reverse order.
Remove and Install
The snap ring is subjected to an initial high pressure; therefore, the pressure must be reduced before being removed.
