Remove/install gear control (GS) control unit

Type ar · emne 26.20 · version 0101 · 2016-02-12

Gælder for: Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.20 Elektro-pneumatisk gearskifte (EPS) - gearstyring (GS) — Serie 958

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.11 Styreenhed/relæ — Serie 958

Gælder også for motorer/gearkasser: 715 3**, 715 5**

AR26.20-B-2000A

Remove/install gear control (GS) control unit

12.02.16

Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Remove/install gear control (GS) control unit

W26.60-1113-11

1 Console

2 Connector

3 Screws

A15 Gear command module (GS)

	Remove and install
1	Turn off engine
2	Pull console (1) up and release gear command module screws (GS) (A15)
3	Push console (1) down and pull the gear command module screws (GS) (A15)
4	Unlock and pull connector (2) out	 Unlock connector (2) pressing unlocker (arrow)
5	Install in reverse order