Detach, attach transmission bearing bracket at transmission

Type ar · emne 26.10 · version 0107 · 2001-01-17

Gælder for: TRANSMISSION 710.64 in MODEL 668, 670 with ENGINE 904.908 TRANSMISSION 710.66 in MODEL 668, 670 with ENGINE 904.914 /923 /936 TRANSMISSION 710.64 in MODEL 670 with ENGINE 904.904

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.10 Gearkasse komplet — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 668 · Serie 670 · Serie 904 (modeller 904, 908, 914, 923, 936)

Gælder også for motorer/gearkasser: 710 64*, 710 66*

AR26.10-D-0020-01D

Detach, attach transmission bearing bracket at transmission

 Manual transmission complete

Number	Designation		Trans-mission 710.640


BA26.10-N-1004-01B	Bolt, console to transmission bearing bracket	Nm	50

Detach, attach transmission bearing bracket at transmission

D26.10-0051-01

1 Unscrew fixing bolt of transmission bearing bracket.

 Installation: Place engine with transmission slightly raised onto transmission bearing bracket, screw in fixing bolts and tighten by hand until they make contact. Then, lower the engine and transmission fully and tighten securing bolts.

 Installation: Pay attention to tightening torque.