Gearbox 715.358 |
1 | Oil control/ filler plug |
W26.00-1023-11
Gearbox 715.372/380/382 and 715.504 up to 715.568 |
1 | Oil control/ filler plug |
2 | Oil filler plug |
W26.00-1015-11
Transmission 715.576 |
1 | Oil control/ filler plug |
W26.00-1016-11
| Check | ||
1 | Clean around the control/ filler plug (1) and the oil filler plug (2) | ||
| Gearbox 715.3 in the Type 958 Gearbox 715.380 in the Type 936.315 except Code G02 Gearbox 715.51/52/531/56/57/585 in the Type 958 | ||
| Gearbox 715.380 on Type 936.315 with Code G02 | ||
Oil filler plug (2) except for gearbox 715.576. | |||
2 | Remove the control/ filler plug (1) inspect the gearbox oil level | The gearbox oil must reach the bottom edge of the filler hole (1). | |
Filling | |||
3 | Remove the fill plug (2) | Only when the oil level is too low and a refilling is difficult at the control/ filler plug (1). | |
4 | Fill the gearbox up to the lower edge of the plug hole (1) or of the filling plug (2) | Observe the adequate specification of the application indicated in the maintenance system. | |
5 | Manually screw the control/filling plug (1) and the filling plug (2) | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Chock the vehicle against unintentional displacement. Utilize closed and close fitting work clothes. Do not touch heated-up or moving parts. | |
6 | Start the engine and let it run for some 2 minutes | ||
7 | Remove the control/ filler plug (1), inspect again the oil level, if necessary, replenish | The gearbox oil must reach the bottom edge of the filler hole (1). | |
8 | Install the control/ filler plug (1) and (2) with new sealing rings | Transmission 715.504 in model 693 | |
Gearboxes 715.3, 715.531/535Oil filler and oil level check plug |