AR25.20-T-0070BA | Bleed clutch operating system | 16.1.06 |
MODEL NMB613.358 /388 with ENGINE 457.944
MODEL NMB671.015 /020 /021 /030 /042 /332 with ENGINE 457.942
Illustrated on model 613.358/388
1 Clutch servo assistance
Arrow Bleeder screw
T25.20-0025-03
Danger! | Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Brake fluid notes | All models | |
1 | Unscrew cap of clutch operating system reservoir | Model 671.015/020/021/030/042/332/333 The clutch operating system reservoir is located in the driver footwell in front of the steering column. | |
Model 613.358/388 The clutch operating system reservoir is located behind the fuel filler flap on the left hand side of the vehicle. For this step: | |||
Remove fuel tank paneling | |||
2 | Connect bleeding unit adapter to clutch operating system reservoir | The bleeding unit must be filled with brake fluid and the pressure in the bleeding unit may not drop below 0.5 bar and may not exceed 1.0 bar. | |
| Bleeder unit, pneumatic | ||
| Syringe | ||
| Bleeder unit, electric | ||
Brake fluid as per Specifications for Operating Fluids | |||
Sheet 331.0 | |||
3 | Detach lower engine compartment paneling | Model 613.358/388 | |
Model 671.015/020/021/030/042/332/333 | |||
4 | Connect receptacle to clutch booster (1) | The bleed screw (arrow) is protected by a dust cap. Use a transparent hose. | |
Bleeding | |||
5 | Switch on bleeding unit and open bleed screw (arrow) | Collect brake fluid which runs out in a suitable container. Leave bleed screw open until brake fluid flows out of hose clean and free of bubbles. | |
6 | Seal bleed screw (arrow) and detach hose | Fit dust cap back on bleed screw (arrow). | |
| Check | ||
7 | Check lines, bleed screw, master cylinder and clutch booster (1) for leaks | Bleeding unit must still be connected and switched on. | |
8 | Detach bleeding unit adapter from clutch operating system reservoir | ||
9 | Screw on cap of clutch operating system reservoir | ||
10 | Check function of clutch | If the clutch does not disengage correctly, repeat the bleeding process. | |
11 | Install lower engine compartment paneling. | Model 613.358/388 | |
Model 671.015/020/021/030/042/332/333 | |||
12.1 | Install fuel tank paneling | Model 613.358/388 |
Commercially available tools
Henviste dokumenter
- ah4250p000101a Oplysninger om bremsevæske
- ar6120t1105aa
- ar6120t1105b
- ar8860t5910b
- as4250z000101a Risiko for forgiftning ved indtagelse af bremsevæske. Risiko for hud- og øjen-skader ved kontakt med bremsevæske
- bb0040p033100a