Check master cylinder for clutch operating system (clutch removed)

AR25.20-P-0102W

Check master cylinder for clutch operating system (clutch removed)

7.3.11



Checking

 Danger!

Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A



Brake fluid notes

AH42.50-P-0001-01A

 Only carry out testing if the clutch plate is burnt

1

Open engine hood and move to vertical position

AR88.40-P-1000V

2

Unscrew cap on brake fluid expansion reservoir (1)

3

Mount test connections (02) of vacuum tester (01) to brake fluid expansion reservoir (1)

 Vacuum tester

*201589132100

4

Mount connector hose of vacuum tester (01) on test connection (02)

5

Operate vacuum pump (01a) 3 to 5 times and while doing so check whether vacuum can be generated

 If it is not possible to build up a vacuum, the master cylinder is OK.

6

Replace master cylinder

If vacuum can be generated during the testing procedure.

AR25.20-P-0100W

7

Detach connector hose for vacuum tester (01) from
test connection (02)

8

Detach test connection (02) from brake fluid expansion reservoir (1)

9

Screw the cap onto the brake fluid expansion reservoir (1)

10

Close engine hood

AR88.40-P-1000V