ar2040t0004aaa

Remove/install hydraulic oil cooler

Type ar · emne 20.40 · version 0101 · 2005-07-12

Gælder for: ENGINE 457.942 in MODEL NMB671.015 /332

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.40 Ventilator, ventilatorkobling — Serie 671 (modeller 015, 332)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.31 Motorkøler — Serie 671 (modeller 015, 332)

Gælder også for motorer/gearkasser: 457 942

AR20.40-T-0004AAA

Remove/install hydraulic oil cooler

7.11.01

ENGINE 457.942 in MODEL NMB671.015 /332

Remove/install hydraulic oil cooler

T20.40-0021-06

1 Feed pipe

2 Return flow pipe

3 Hydraulic oil cooler

4 Screw

5 Screw

Remove/Install

1

Open the bottom right rear maintenance flap of the vehicle

2

Remove intercooler

AR09.41-T-6817AAA

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under pressure. Risk of poisoning caused by swallowing hydraulic fluid.

Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

3

Drain hydraulic fluid

Hydrostatic fan drive - oil and filter change

AP20.40-T-2001AA

4

Detach feed pipe (1) and return flow pipe (2) from hydraulic fluid cooler (3)

Installation: Clean sealing surfaces and install new gaskets.

5

Unscrew bolts (4, 5) and remove the hydraulic oil cooler (3)

Installation: Ensure that the hydraulic oil cooler (3) does not lie against body parts; otherwise, there is a possibility of leaks.

6

Install in the reverse order

Henviste dokumenter