ar0941t6817aaa

Removing/installing charge air cooler

Type ar · emne 09.41 · version 0101 · 2005-07-12

Gælder for: ENGINE 457.942 in MODEL NMB671.015 /332

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 671 (modeller 015, 332)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.45 Ladeluftkøler — Serie 671 (modeller 015, 332)

Gælder også for motorer/gearkasser: 457 942

AR09.41-T-6817AAA

Removing/installing charge air cooler

6.11.01

ENGINE 457.942 in MODEL NMB671.015 /332

Removing/installing charge air cooler

1 Flange

2 Bottom bolt

3 Top bolt

4 Charge air cooler

T09.41-0041-03

Removal/installation

1

Open lower maintenance flap at the right rear on the vehicle

2

Remove bottom charge air pipe on right

AR09.41-T-1315AAA

3

Slacken clamp on flange (1)

4

Unscrew lower bolt (2) and then upper bolt (3)

The charge air cooler (4) is then only connected on the flange (1). Support the charge air cooler (4) by suitable means, otherwise damage can occur.

The charge air cooler (4) can now be swiveled.

5

Remove clamp on flange (1)

6

Swivel out charge air cooler (4) and remove from flange (1)

Do not swivel out the charge air cooler (4) completely to avoid damaging the charge air cooler (4).

Installation: Replace O-ring in flange (1). Check for correct seating if the charge air cooler (4) relative to the flange (1).

7

Install in reverse order

Henviste dokumenter