ar2040p6800ac

Remove/install fan shroud

Type ar · emne 20.40 · version 0300 · 2008-02-26

Gælder for: ENGINE 137 in MODEL 215, 220 ENGINE 275.950 in MODEL 215.376, 220.176 ENGINE 275.951 in MODEL 230.476 ENGINE 275.981 in MODEL 230.479 ENGINE 275.954 in MODEL 230.477

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.40 Ventilator, ventilatorkobling — Serie 215 · Serie 220 · Serie 230 (modeller 476, 477, 479)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.45 ventilator/ventilatorkobling/ventilatordrev — Serie 215 · Serie 220 · Serie 230 (modeller 476, 477, 479)

Gælder også for motorer/gearkasser: 137 ***, 275 950, 275 951, 275 954, 275 981

AR20.40-P-6800AC

Remove/install fan shroud

12.2.08

ENGINE 137 in MODEL 215, 220

ENGINE 275.950 in MODEL 215.376, 220.176

ENGINE 275.951 in MODEL 230.476

ENGINE 275.981 in MODEL 230.479

ENGINE 275.954 in MODEL 230.477

Remove/install fan shroud

P20.40-2038-04

Shown on model 220

1 Fan shroud

2 Coolant line

3 Fastening shackles

4 Radiator supports

Modification notes

12.8.02

Fastening of ATF line modified in coolant line.

Step 9

Remove/install

1

Disconnect ground line of battery

Model 230.479

AR54.10-P-0003R

Notes on battery

AH54.10-P-0001-01A

2

Remove front engine cover

Model 215.376, 220.176, 230.476 /477

AR01.10-P-2405LA

Model 215.379, 220.179, 230.479

AR01.10-P-2405IM

3

Detach plastic cover over RH lamp unit

Model 230.479

4

Remove radiator crossmember

Model 230.479

5

Unclip coolant hose from top of fan shroud (1)

Model 230.479

6

Remove left and right engine intake air ducts

7

Detach the clamps at top of radiator for fastening the fan shroud (1)

Model 230.479

8

Unscrew bolts from mounting brackets (3) of fan shroud (1)

9

Disconnect electrical connector from fan shroud (1) and detach cable tie

10

Remove automatic oil line

Before opening the automatic transmission or its components, the ambiance of the separation point has to be cleaned thoroughly. Even the smallest particles of dirt, introduced into the hydraulic components, can result in malfunctions and a total failure of the automatic transmission.

Only remove at top right of radiator. Seal ATF lines so that no ATF flows out.

*BA20.20-P-1001-01A

11

Detach coolant line bracket (2) under the fan shroud (1)

Model 215, 220

12

Unhook fan shroud (1) from radiator supports (4) and remove upward

Installation: Check that the fan shroud (1) is correctly seated in the radiator supports (4).

13

Install in the reverse order

14

Check oil level in automatic transmission, correct if necessary

AR27.00-P-0100AC

Radiator, coolant hoses

Number

Designation

Engine 137.970

Engine
275

BA20.20-P-1001-01A

Union nut, automatic transmission oil line to radiator

Nm

20

25

Henviste dokumenter