Shown on engine 276.9 in model 172 |
1 | Engine cover |
2 | Engine air intake duct |
3 | Cold air intake |
4 | Fan unit |
P20.20-2408-06
Shown on engine 276.9 in model 172 |
4 | Fan unit |
5 | Air duct segment |
5a | Unlocking lugs |
P20.40-2204-06
| Remove/install | ||
1 | Remove front engine cover (1) | Engine 276.9 in model 172 | |
2 | Remove engine air intake duct (2) upstream of air filter | ||
3 | Remove cold air intake (3) | ||
4 | Unclip upper air duct segment on fan unit (4) | ||
5 | Remove front section of lower engine compartment paneling | ||
6 | Press unlocking fishplates (5) apart and unclip lower air duct segment (5) on the left and right from the fan unit (4) | ||
7 | Release and disconnect electrical connection at fan unit (4) | ||
8 | Unclip electrical line for fan motor at fan unit (4) | ||
9 | Unclip fan unit (4) on engine radiator | ||
10 | Remove fan unit (4) in the upward direction | ||
11 | Install in the reverse order | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Perform an engine test run and check engine cooling system for proper operation |
Henviste dokumenter
- ar6120p1105w
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører