1 | Expansion reservoir |
2 | Bleed lines |
3 | Coolant hose |
P20.30-2437-12
| Remove/install | ||
1 | Drain off coolant | ||
2 | Detach vent lines (2) from expansion reservoir (1) | ||
3 | Detach coolant hose (3) from expansion reservoir (1) | ||
4 | Disconnect lower electrical connection at expansion reservoir (1) | ||
5 | Unclip expansion reservoir (1) from bracket and pull out of rubber guide | Check rubber guide for damage and replace if necessary. | |
6 | Install in the reverse order | ||
| Check | ||
7 | Check engine cooling system for leaktightness | ||
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
8 | Perform an engine test run; check engine for proper function and leaktightness |
Henviste dokumenter
- ar0941p131101al
- ar2000p1010mta
- ar2000p1142mta
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører