ar2020t386506cb

Detaching and attaching coolant hoses/lines at engine

Type ar · emne 20.20 · version 0100 · 2005-07-12

Gælder for: ENGINE 457.944 in MODEL NMB613.367

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 20 Motorkøling › 20.20 Køler, kølerslanger — Serie 613 (modeller 367)

EinPAS 15 Motor › 15.25 Motorkølesystem › 15.25.13 ledning/slange/ventil — Serie 613 (modeller 367)

Gælder også for motorer/gearkasser: 457 944

AR20.20-T-3865-06CB

Detaching and attaching coolant hoses/lines at engine

Danger!

Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles.

Wear protective gloves, protective clothing and eye protection.

AS20.00-Z-0001-01A

Detaching and attaching coolant hoses/lines at engine

T20.20-0067-11

1 Remove vent hose of cooling circuit (1) between engine and expansion reservoir (2).

2 Remove coolant pipe (3) between thermostat and radiator.

3 Remove coolant hose (4) between water pump and radiator.

Detaching and attaching coolant hoses/lines at engine

T20.20-0068-01

Glance through open right rear maintenance flap

4 Remove coolant hoses and pipes (5) between engine and retarder.

Detaching and attaching coolant hoses/lines at engine

T20.20-0069-11

5 Remove coolant pipe (arrow) between stationary heater and retarder.

6 Remove coolant hoses and pipes (6) with bracket (7) between engine and retarder.

7 Install in reverse sequence.

Henviste dokumenter