AR20.10-W-2460JA | Remove/install coolant thermostat | 7.10.10 |
ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976
ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976
W20.10-1044-06
Shown on engine 900.9
1 Coolant thermostat
2 O-ring
3 Coolant pump
4 Coolant line
Arrow Vent opening
| Remove/install | ||
Danger! | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut. | |
1 | Tilt cab | Installation: Only tilt cab back after leak test has been conducted. | |
| Notes on tilting the cab | ||
2 | Drain coolant | ||
3 | Detach coolant line (4) at coolant pump (3) | | |
4 | Remove coolant thermostat (1) and O-ring (2) | Installation: Note the installation position of coolant thermostat (1). The vent opening (arrow) must point upwards. | |
5 | Test coolant thermostat (1) | Only if coolant thermostat (1) is to be reused. | |
6 | Install in the reverse order |
Coolant pump, coolant thermostat
Henviste dokumenter
- ah6080n000301a Oplysninger om tipning af førerhus
- ar2000w1142j
- ar2010w2455a Kontrol af termostat
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes