Remove/install oil pressure sensor

AR18.40-S-5115PB

Remove/install oil pressure sensor

11.12.2018

Model

470 with engine 200

Modification notes

10.12.2018

Method extended

Operation steps 1, 2

1

Oil pressure sensor

2

Electrical connector

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

 

Remove/install

1

Remove right front wheel.

AR40.10-S-1100P

2

Remove right front fender liner.

AR88.10-S-1301P

 Installation: Install fender liner after the leak check.

3

Disconnect electrical connection (2).

4

Remove oil pressure sensor (1).

 Installation: Apply sealant on thread of oil pressure sensor (1).

Universal sealant 205 ml

*BR00.45-Z-1004-01A

 Oil pressure sensor to cylinder crankcase

*BA18.40-N-1003-02P

5

Install in the reverse order.



Check

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Check for leaktightness when engine is running.

 Visual inspection only.

 Temperature sensor, oil pressure sensor

Number

Designation

Model 470 with engine 200

BA18.40-N-1003-02P

Oil pressure sensor to cylinder crankcase

Nm

15

Repair materials

Number

Designation

Order number

BR00.45-Z-1004-01A

Universal sealant 205 ml

A 003 989 01 71