Remove/install crankshaft position sensor

AR15.12-P-2133GY

Remove/install crankshaft position sensor

04.12.2019

Engine

642 in model 461, 463

1

Screw

2

Heat shield

3

Electrical connector

4

Screw

B70

Crankshaft Hall sensor

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

 

Remove/install

1

Lift vehicle with lifting platform.

AR00.60-P-1006A

2

Remove left front wheel well trim.

Engine 642 in model 461, 463

Engine 642 in model 463
as of model year 2019

AR88.10-P-1300XG

3

Remove the cover panel for the front-left wheel well paneling.

4

Unscrew the screw (1) and remove the heat shield (2).

5

Release and disconnect the electrical connector (3) on the crankshaft Hall sensor (B70).

6

Remove screw (4) and remove crankshaft Hall sensor (B70).

 Crankshaft position sensor to engine block

*BA15.10-P-1001-03G

7

Install in the reverse order.

8

Read out and delete fault memory.

Engine 642 in model 461, 463



Engine 642 in model 461
Engine 642 in model 463
up to model year 2019

AD00.00-P-2000-04A

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

9

Conduct engine test run while checking for proper operation of the engine.

 Hall sensor

Number

Designation

Engine 642

BA15.10-P-1001-03G

Crankshaft position sensor to engine block

Nm

9